Health and safety policy template (UK): who needs one and what to put in it
Last updated 13 November 2026 · Sources last checked 27 October 2026
HSE says every business must have a health and safety policy, and that businesses with five or more employees must write it down. With fewer than five employees you do not have to write it down, but HSE says it is useful to. A policy sets out your general approach to health and safety and explains who is responsible for what, when and how. This page covers what the law and HSE say and gives a structure you can copy.
What the law and HSE say
- The Health and Safety at Work etc. Act 1974 requires an employer to prepare a written statement of their general health and safety policy, and the organisation and arrangements for carrying it out. The employer must revise it as often as appropriate and bring it, and any revision, to the attention of all employees (section 2(3)).
- Employers with fewer than five employees are excepted from that duty (Employers' Health and Safety Policy Statements (Exception) Regulations 1975).
- HSE's guidance says the same in plain terms: share the policy, and any changes to it, with your employees (HSE, prepare a health and safety policy).
- Separately, an employer with five or more employees must record their health and safety arrangements in writing (Management Regulations, regulation 5).
What a policy covers: three parts
HSE describes a policy in three parts (HSE, how to write your policy):
- Statement of intent. Your general approach to health and safety, your commitment to managing it, and the aims you are working toward. See the health and safety policy statement page.
- Responsibilities. Who in the business has specific health and safety duties, with their positions and roles.
- Arrangements. The practical measures you use to meet your aims, such as risk assessments, training and safety equipment.
A structure to copy
Part 1: Statement of intent
- Company name and what the business does.
- Your commitment to the health, safety and welfare of employees and others affected by your work.
- Your aims, in plain words.
- Signature, printed name, date, and the date the policy is next due for review.
Part 2: Responsibilities
- Who has overall responsibility for health and safety.
- Who looks after it day to day.
- Who is responsible for specific areas: first aid, fire, risk assessments, training, contractors.
- The duties of every employee: to cooperate, to look after their own safety and that of others, and to report concerns.
- Who the "competent person" is who helps you meet your duties. Employers must appoint one or more competent people for this (regulation 7).
Part 3: Arrangements
HSE's template prompts for arrangements such as risk assessment, training, consultation and evacuation. Regulation 5 describes the aim as effective planning, organisation, control, monitoring and review of preventive and protective measures. For a trades business, think also about:
- How risk assessments and method statements are produced, approved and briefed.
- First aid and accident reporting.
- How you check and manage subcontractors.
- Equipment inspection and maintenance.
- How hazardous substances are assessed and controlled.
Policy or RAMS?
A policy is the company-level document: your general approach and your arrangements. A RAMS is the job-level document: the risks and method for one piece of work. Clients often want to see both. See the RAMS template.
Common mistakes
- Another company's name still in it. Copied policies are easy to spot.
- Responsibilities that name people who have left, or roles nobody holds.
- No review date, or one long passed.
- Arrangements too vague to act on. "We will carry out risk assessments" says nothing about how, by whom or when.
- Nobody has seen it. The Act requires you to bring the policy to the attention of all employees; keep a record that you did.
Draft yours in Kompliant
Kompliant drafts a Health & Safety Policy from your company profile. It covers purpose and scope, responsibilities, a policy statement setting out the company's commitments, arrangements written for the way your firm works, relevant legislation, and a review note with a signature block for the director to adopt it. Kompliant can also turn a policy into a short multiple-choice quiz for staff or subcontractors to take and sign. Kompliant produces a draft for your competent person to review and adopt.
Example: parts of a policy drafted in Kompliant
Example. Fictional company. Draft, not approved.
2.1 Employer (Director)
The Director has overall responsibility for health and safety and will:
- Adopt, resource and review this policy, and make sure enough time, money and equipment are available to carry out the work safely.
- Appoint a competent person to give health and safety advice (to be confirmed: name / external consultant).
- Ensure risk assessments and method statements are prepared before work starts and that teams are briefed on them.
- […]
2.2 Managers and Team Leaders
Whoever leads a job or team (the senior person in each two-person team) will:
- Check the risk assessment and method statement for the job are in place and suit the site conditions before starting.
- Sign in with the site contact on arrival and brief them on the work, the areas affected and any planned isolations.
- Obtain asbestos information from the site contact before drilling or disturbing ceilings or walls, and stop work if it is not available or something suspect is found.
- […]
2.3 Employees and Subcontractors
All employees and subcontractors must:
- Take reasonable care of their own health and safety and that of others affected by their work.
- Follow safe systems of work, risk assessments, method statements and site rules.
- Never work on circuits that have not been isolated, locked off and proved dead, except where a documented and justified live-work procedure has been authorised.
- […]
4. Arrangements (headings)
4.1 Risk Assessment and Method Statements · 4.2 Site Arrival, Sign-In and Communication · 4.3 Electrical Safety and Isolation · 4.4 Working at Height · 4.5 Asbestos · 4.6 Working in Occupied Buildings · 4.7 Plant, Equipment, Vehicles and PPE · 4.8 Manual Handling and Other Hazards · 4.9 Waste · 4.10 First Aid, Accidents and Emergencies · 4.11 Training, Competence and Supervision · 4.12 Monitoring, Consultation and Subcontractors
4.3 Electrical Safety and Isolation
- All isolations are locked off with the company's own lock-off kit, tagged with the worker's details, and the circuit is proved dead using an approved voltage indicator or test instrument, itself proved before and after use.
- Where practicable, work is carried out dead. Live work is only permitted where it is unreasonable to work dead, suitable precautions are in place and it has been authorised by the Director (to be confirmed by the company).
- Test instruments and leads are maintained, checked before use and calibrated in line with manufacturer guidance.
- Only competent persons carry out electrical work, and no one works on systems they are not trained for.
- Isolated equipment is never re-energised until all workers are clear and the work has been inspected and tested.
1Gaps are left as gaps
“Appoint a competent person to give health and safety advice (to be confirmed: name / external consultant).”
The draft leaves the name blank rather than inventing one. This is the competent person regulation 7 asks for.
2An arrangement with a "how"
“…the company's own lock-off kit, tagged with the worker's details…”
Who does what, with what. Compare "we will carry out risk assessments" with nothing behind it.
Questions
Do I need a written health and safety policy?
HSE says every business must have a health and safety policy, and businesses with five or more employees must write it down. Under five, you do not have to write it down, but HSE says it is useful to.
Who signs the policy?
HSE says the employer, or the most senior person in the company, should sign the statement of intent and review it regularly.
How often should I review it?
HSE says "regularly" and does not set an interval. The Act requires the employer to revise it as often as appropriate. Review it when the business changes (new staff, new kinds of work, new premises) and put the next review date on the document.
I have fewer than five employees. Should I still write one?
HSE says it is useful to. Clients, main contractors and assessors often ask to see a policy, and having one makes it easier when the business grows.
Do I have to give it to my employees?
HSE says you must share the policy, and any changes to it, with your employees. The Act requires the employer to bring the policy statement and any revisions to the notice of all employees. Many firms include it in induction and keep a record.
What is the difference between the policy statement and the policy?
The statement of intent is the first part of the policy. See the policy statement page.
Sources
Sources last checked 27 October 2026. This page has not yet been reviewed by an external health and safety adviser.
- Health and Safety at Work etc. Act 1974, section 2
- Employers' Health and Safety Policy Statements (Exception) Regulations 1975
- HSE: Prepare a health and safety policy
- HSE: How to write your policy
- HSE: Health and safety policy template (PDF)
- Management of Health and Safety at Work Regulations 1999, regulation 5
- Management of Health and Safety at Work Regulations 1999, regulation 7
This page describes the law in Great Britain (England, Scotland and Wales). Northern Ireland has its own regulations: see HSENI. Kompliant drafts documents for your competent person to review, edit and approve. The guidance on this page is general information, not legal advice.