Health and safety policy statement (statement of intent): what to write
Last updated 13 November 2026 · Sources last checked 27 October 2026
A health and safety policy statement is the opening part of your health and safety policy. HSE calls it the statement of intent. It sets out your general approach to health and safety, your commitment to managing it, and the aims you are working toward. HSE says the employer, or the most senior person in the company, should sign it and review it regularly (HSE, how to write your policy).
Statement or policy?
People use "policy statement" for both. HSE splits the policy into three parts: the statement of intent, the responsibilities, and the arrangements. The statement is Part 1, usually a page or less. Parts 2 and 3 say who is responsible for what and how health and safety is managed day to day. Many clients ask for the statement; assessors and principal contractors often want the full policy too. For the full policy, see the health and safety policy template.
What to put in a statement
- Who you are. The company name and what the business does.
- Your commitment. That you will look after the health, safety and welfare of your employees and of other people affected by your work. For employees, the Act's general duty is to ensure this "so far as is reasonably practicable" (Health and Safety at Work etc. Act 1974, section 2(1)).
- Your aims. What you will actually do. The Act gives examples of what an employer's duty includes, such as safe equipment and systems of work, safe handling of substances, and information, instruction, training and supervision.
- Who is accountable. The person with overall responsibility.
- Signature block. Signature, printed name, date, and the date the statement is next due for review. HSE's template has all four.
Starter wording
This is original wording to start from. Change it to fit your business, and do not sign commitments you do not intend to keep.
[Company name] is committed to the health, safety and welfare of its employees and of everyone affected by its work, so far as is reasonably practicable. We will assess the risks of our work and act on them; give people the information, instruction, training and supervision they need; consult our employees on health and safety matters; keep our equipment and workplaces safe; and review this statement regularly. [Name], [position], has overall responsibility for health and safety in the business. Signed: ____ Date: ____ Next review due: ____
Who signs and when to review
HSE says the employer, or the most senior person in the company, should sign it. That means someone who can commit the business to what the statement says. HSE says to review "regularly" and does not set an interval; the Act requires the employer to revise the policy as often as appropriate. Date it and put the next review date on it.
Make sure people have seen it
The Act requires the employer to bring the policy statement, and any revision to it, to the attention of all employees (section 2(3)). How you do that is up to you. Many firms display it where staff will see it and cover it at induction. Keep a record of who has seen the current version.
Common mistakes
- Signed by someone who has left, or by someone with no authority over the business.
- Aims with no arrangements behind them. The statement says what you will do; Parts 2 and 3 of the policy say how.
- No review date.
- A statement from another business with the name changed.
Draft yours in Kompliant
Kompliant drafts the full Health & Safety Policy from your company profile. It includes a Policy Statement section, where the company sets out what it commits to, alongside the responsibilities and arrangements behind those commitments, and a signature block for the director to adopt it. You edit it, approve it, and download it as a PDF. If you only need the short statement for a notice board or a tender form, copy the statement section out, or start from the wording above. Kompliant produces a draft for your competent person to review and adopt.
Example: the policy statement section of a generated policy
Example. Section 3 of a generated policy. Fictional company.
3. Policy Statement
Example Electrical Ltd is committed to providing a safe and healthy working environment for everyone affected by our activities. No job is so urgent or valuable that it justifies working unsafely. Any person may stop work if they believe it is unsafe, without fear of criticism.
The company commits to:
- Comply as a minimum with the relevant health and safety legislation and approved codes of practice, and follow recognised industry guidance for electrical work.
- Identify hazards, assess risks and put in place suitable controls before work starts, recording significant findings in writing.
- Safely isolate, lock off and prove dead before any electrical work begins, using our own lock-off kit.
- Provide safe plant, equipment and access equipment, and maintain and inspect it, including hiring scissor lifts where the task needs one rather than improvising access.
- Seek asbestos information before disturbing ceilings or walls, and never knowingly disturb suspected asbestos-containing materials.
- Protect people in occupied buildings, including children and vulnerable people, through planning, barriers, signage and communication with the site contact.
- Provide information, instruction, training and supervision so that people are competent for the work they do.
- Consult and involve employees in health and safety.
- Manage waste responsibly, removing it from site and recycling it through a licensed carrier.
- Provide adequate welfare and first aid arrangements on every job.
- Investigate accidents and near misses, learn from them, and review this policy regularly.
7. Adoption by the Director
I confirm that I have read this policy and adopt it on behalf of Example Electrical Ltd, and that I will ensure it is brought to the attention of all employees and others working on the company's behalf.
Name: ____ · Position: ____ · Signature: ____ · Date: ____
Questions
What should a health and safety policy statement say?
Your general approach to health and safety, your commitment to managing it, and the aims you are working toward, signed and dated by the employer or the most senior person in the company.
Who signs it?
HSE says the employer, or the most senior person in the company, should sign it and review it regularly.
What is the difference between a policy statement and a health and safety policy?
The statement is Part 1 of the policy: the statement of intent. The full policy also sets out responsibilities (Part 2) and arrangements (Part 3).
How long should it be?
Usually a page or less. It is the short, signed commitment at the front of the policy.
Do I have to display it?
The Act requires you to bring the policy statement and any revisions to the notice of all employees. How you do that is up to you; many firms display it and cover it at induction.
Do I need one if I have fewer than five employees?
You do not have to write it down, but HSE says it is useful to. Clients and principal contractors often ask for one. See the policy template page for the threshold.
Sources
Sources last checked 27 October 2026. This page has not yet been reviewed by an external health and safety adviser.
- Health and Safety at Work etc. Act 1974, section 2
- HSE: Prepare a health and safety policy
- HSE: How to write your policy
- HSE: Health and safety policy template (PDF)
This page describes the law in Great Britain (England, Scotland and Wales). Northern Ireland has its own regulations: see HSENI. Kompliant drafts documents for your competent person to review, edit and approve. The guidance on this page is general information, not legal advice.